Essential Aircraft Mechanic Tools List

March 29, 2021 | By JETechnology Staff

Aircraft mechanics require precise knowledge and customized tools to perform their duties. They are responsible for an airplane’s safety and efficiency, and they rely on a few basic pieces of equipment for a wide range of jobs pertaining to airplane maintenance. Aircraft mechanics should own all the following aircraft mechanic tools.

1. Screwdriver 

Screwdrivers tighten and loosen bolts and screws. The two most common types are the Philips numbers one and two. An incorrectly sized screwdriver or screw can cause wear and tear and make the job harder. Screwdrivers require torque, and an incorrect size can require much more manual labor. 

2. Torque Wrench

A torque wrench installs screws that require a specific level of torque. The user calibrates the wrench with the attached gauge. Once the screw has achieved the right torque level, the wrench will click to alert the operator to remove the wrench. 

3. Impact driver

Impact drivers break loose stuck fasteners. The impact driver is struck with a hammer or mallet to remove overly torqued screws or corroded bits. This tool can also provide a level of force unachievable by a hand screwdriver. 

4. Magnets

Small magnetic parts are a severe hazard if they enter moving equipment during the flight. Magnets can reach hard-to-access places and collect these fragmented pieces. Magnets are usually long and extendable so they can easily retrieve these magnetic pieces and keep them out of the engine or wiring. 

5. Mirrors

Aircraft are complex machines that contain many working pieces. Mirrors are necessary for the mechanic to see all the parts within the aircraft. Sometimes, when a mirror is not enough, skilled mechanics do use touch to insert and repair parts. 

View Aircraft Ground Support Equipment

6. Pliers

The most common types of pliers used in aircraft repair are duckbill, diagonal and needlenose. Needlenose pliers make small adjustments in tight spaces. Diagonal pliers are essential for installing and cutting safety wiring, and duckbill pliers twist safety wiring. Misuse of pliers can result in damage to the aircraft and the tool. 

7. Punches

Punches are useful for a range of applications. These tools can help mechanics create holes in sheet metal, find the center of a circle, start drilling holes or remove damaged bolts and rivets. The two standard types are hollow and solid. Punches should create holes without dimpling the metal. They help transfer holes from paper to metal and create an ideal opening for screws. 

8. Rivet Guns

A rivet gun drives the rivet through the metal to create a joint and fasten pieces together. Rivets replace screws and bolts in places where the mechanic cannot access the back of the material. Riveting is used on aircraft because it is a sturdy fastener that is lightweight. 

Find Your Safety Tools With JETechnology Solutions

Aircraft maintenance tools are necessary for passenger safety. Efficient tools can help your mechanics better repair and bolster aircraft. JETechnology Solutions carries aircraft maintenance stands for ground aircraft maintenance. Contact us today to learn more, speak with an engineer or request a proposal

Get In Touch With Our Team Today

Contact Us Today *Required